Application of dielectric barrier discharge (DBD) plasma packed with glass and ceramic pellets for SO2 removal at ambient temperature: optimization and modeling using response surface methodology

Air pollution is a major health problem in developing countries and has adverse effects on human health and the environment. Non-thermal plasma is an effective air pollution treatment technology. In this research, the performance of a dielectric barrier discharge (DBD) plasma reactor packed with glass and ceramic pellets was evaluated in the removal of SO₂ as a major air pollutant from air in ambient temperature. The response surface methodology was used to evaluate the effect of three key parameters (concentration of gas, gas flow rate, and voltage) as well as their simultaneous effects and interactions on the SO₂ removal process. Reduced cubic models were derived to predict the SO₂ removal efficiency (RE) and energy yield (EY). Analysis of variance results showed that the packed-bed reactors (PBRs) studied were more energy efficient and had a high SO₂ RE which was at least four times more than that of the non-packed reactor. Moreover, the results showed that the performance of ceramic pellets was better than that of glass pellets in PBRs. This may be due to the porous surface of ceramic pellets which allows the formation of microdischarges in the fine cavities of a porous surface when placed in a plasma discharge zone. The maximum SO₂ RE and EY were obtained at 94% and 0.81 g kWh⁻¹, respectively under the optimal conditions of a concentration of gas of 750 ppm, a gas flow rate of 2 l min⁻¹, and a voltage of 18 kV, which were achieved by the DBD plasma packed with ceramic pellets. Finally, the results of the model's predictions and the experiments showed good agreement.     

Investigation of improved dielectric and thermal properties of ternary nanocomposite PMMA/MXene/ZnO fabricated by in-situ bulk polymerization

Electric power system applications demand for high-temperature dielectric materials. The improved performance of polymer nanocomposites requires improvement in their thermal conductivity & stability, dielectric stability and processing technique. However, they often lose their dielectric properties with a rise in temperature. Here, we offer a solution by incorporating electrically conducting material (MXene) and semiconducting inorganic nanoparticles (ZnO NPs) into an insulating PMMA polymer matrix to maintain high dielectric constant, both at the room and high temperature. Therefore, to achieve desirable thermal and dielectric properties is the main objective of the present study based on the homogeneous distribution of the nanofillers by in-situ bulk polymerization assisted by strong sonication in the corresponding polymer. The introduction of MXene and ZnO NPs into the PMMA not only acquires a substantial increment in the dielectric constant, to attain a value 437, with minimum energy loss of 0.36 at 25 Hz, but also improves the thermal conductivity of PMMA up to 14 times by causing the reduction of thermal resistance, which is actually responsible for the poor thermal conductivity of amorphous pure PMMA polymer. More importantly, hybrid PMMA/4:2 wt% MXene:ZnO nanocomposite leads to an excellent thermal stability. Moreover, further characterization of the synthesized nanocomposites by FTIR, SEM and XRD leads to the evaluation of strong interaction of ternary components with PMMA matrix.     

Chemical Looping Steam Methane Reforming via Ni-ferrite Supported on Cerium and Zirconium Oxides

Pure hydrogen was produced by means of chemical looping steam methane reforming with novel oxygen carriers. Ni-ferrite, Ni-ferrite-ZrO₂, and Ni-ferrite-CeO₂ were synthesized as oxygen carriers and characterized by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) method, scanning electron microscopy (SEM), dynamic light scattering (DLS), and hydrogen temperature-programmed reduction (H₂-TPR). The performances of the as-synthesized oxygen carriers in the cyclic oxidation-reduction were investigated in the packed-bed microreactor at a defined temperature range and under atmospheric pressure. Ni_0.39Fe_2.61O₄-ZrO₂ exhibited the best performance and maximum methane conversion among the other oxygen carriers. In addition, high selectivities for H₂ and CO were reached.     

Dielectric and electrical studies on iron oxide (α-Fe2O3) nanoparticles synthesized by modified solution combustion reaction for microwave applications

Journal of Electroceramics - Hematite (α-Fe2O3) nanoparticles were synthesized by modified solution combustion method using a mixture of hexamethylenetetramine (HMTA) and glycine fuels at fuel...     

Thermal Evaluation of Diesel/Hydrogen Peroxide Fuel Blend

Thermal properties of fossil fuel are the key fundamental characteristics, which can distinguish any compound as a potential fuel. The performance of diesel fuel blend along with stability and solubility parameter designs are evaluated. The results from the experimental study indicate that the increase in hydrogen peroxide (H₂O₂) amount enhances the cetane number of diesel fuel blend significantly. However, the calorific value decreases as compared to pure diesel fuel. All values performed well according to the ASTM D‐975 diesel testing method. The thermodynamics of the prepared fuel blends also revealed that substantial solubility and diesel/H₂O₂ blend stability are provided even at lower temperatures. Such blends can be used as a feasible replacement of pure diesel fuel.     

Conductive multichannel PCL/gelatin conduit with tunable mechanical and structural properties for peripheral nerve regeneration

Peripheral nerve injuries remain among the most challenging medical issues despite numerous efforts to devise methods in fabrication of nerve conduits to functionally regenerate axonal defects. In this regard, the current study offers a holistic perspective in design by considering the mechanical, topographical and structural aspects which are crucial for a successful nerve guide conduit. Poly(e-caprolactone) and gelatin were employed to serve this purpose in the form of dual-electrospun films which were rolled and later shaped the assembly of a multichannel conduit. Polyaniline/graphene (PAG) nanocomposite was incorporated to endow the conduit with conductive properties. FTIR analysis, water contact angle measurements, and SEM observations as well as mechanical and conductivity tests were used to evaluate the properties of the conduits. In addition, MTT assay was conducted to assess the proliferation of rat bone marrow-derived mesenchymal stem cells cultured on the films. Incorporating 2% PAG proved to have superior cell support and proliferation, while guaranteeing electrical conductivity of 10.8 × 10⁻⁵ S/cm and remarkable tensile strength of 3.52 ± 1.3 MPa and 14.12 ± 3.1 MPa for wet and dry conditions, respectively. Overall, the observed results highlight the great potential of the fabricated conduit to be used as a candidate for peripheral nerve defects.